Combine Solicitation – RFQ 5180-01-518-7804
Federal Information & News Dispatch, Inc. |
Notice Type: Combine Solicitation
Posted Date:
Office Address:
Subject: RFQ 5180-01-518-7804
Classification Code: 51 - Hand tools
Solicitation Number: RFQ-5180-01-518-7804-1
Contact:
Description:
Federal Acquisition Service (FAS)
FMHAC & HSOC
REQUEST FOR QUOTATION
RFQ-5180-01-518-7804
GSA Global Supply
Phone: (816) 926-3582
Email: mailto:[email protected]
FOR INFORMATION, PLEASE contact:
Please submit your response by close of business
Important: This is a request for quotations, and quotations furnished are not offers. This request does not commit the Government to pay any costs incurred in the preparation of the submission of this quotation, or to contract for supplies or services. Supplies are of domestic origin unless otherwise indicated by quoter. If you are unable to quote, please so indicate on this form and return.
Please review the attached item purchase description(s).
Delivery shall be FOB Destination.
Shipment time ____________________ARO (After receipt of order)
Price is valid through ____________________________
Vendor's Minimum Order Amount, if any:___________________
Business size: Large _______ or Small ________
Vendor's DUNS Number: ____________________________________
Name & address of vendor and signature of quoter:
Name:_____________________________________________________
Address:___________________________________________________
City:_________________________________ State:________________
Telephone: _____________________________FAX: _________________
Print name:___________________________________________________
Signature:____________________________________ Date:_________
PLEASE NOTE: Effective
Return pages 1 through 2. Failure to return all pages will result in your quote being removed from consideration.
Please provide pricing for the following NSN(s). See description(s) below.
! NSN ! QTY ! Unit price !
! 5180-01-518-7804 ! 1 ! !
!
5180-01-518-7804 UI: KT
WRENCH KIT, TORQUE
DESCRIPTION
Kit contains
3 Crowfoot open end wrenches (
1 torque screwdriver (
2 torque wrenches (
2 Torque, EMI compliance, tools (
Offering on:
Manufacturer's Name: ______________________________
Brand __________________________________________
Model or Part No. __________________________________
FAR Provisions 52.211-6, Brand Name or Equal Applies.
ITEM MARKING
Each item Shall Be Marked in a Permanent and Legible Manner with:
1) Manufacturer's Part Number
2) Manufacturer's Name or Identifying Symbol, and
3) Country of Origin
Each Package including the unit, single, intermediate, and exterior container must be labeled with the requisition number or Transportation Control Number (TCN). Requisition Number and TCN are found on the Purchase Order.
PACKAGING
One (1) item shall be preserved and packaged in a unit package designed to protect the item against damage during shipment, handling, and storage.
MARKING
All unit, intermediate, transport packages and unit loads shall be marked and bar coded for delivery to the GSA DEPOT and MILITARY ACTIVITIES shall be in accordance with the latest version of MIL-STD-129, "Military Marking For Shipment and Storage". "Latest version" is defined as the version in effect on the date of bid submittal. Federal Standards and Military Standards can be accessed on-line via the
http://assist.daps.dla.mil/quicksearch/
NOTICE: All Pallets transported / Shipped to the GSA Depot MUST be HEAT TREATED and marked IAW IIPC
Palletization: The shipping (transport) containers shall be palletized. The pallets shall be 48-inch length x 40-inch width, general purpose, four-way entry, flush stringer, and double-face non-reversible pallets. The palletized load shall not exceed 2500 pounds in weight for shipments to the Eastern Distribution Center (Burlington). The palletized load shall not exceed 2000 pounds in weight for shipments to the Western Distribution Center (French Camp Location). The palletized load shall not overhang the pallet deck board edge by more than 1 inch and shall not exceed 53 inches in overall height (including pallet). Less than half pallet loads or loads shipped by small package carrier in acceptable transport packing need not be palletized. When less than full but more than a half pallet is used, the palletized load shall utilize proper bracing and/or reinforcement to ensure that the load can withstand two additional loads placed on it.
Stacking: A load-stacking test shall be performed once, at the beginning of the contract, for each different unitized or palletized load configuration. A fully palletized load shall be tested utilizing a total stack of three palletized loads, with all the proper bracing and/or reinforcement necessary to perform the test. There shall be no evidence of damage to the pallets, shipping containers or products when stack is tested on the rigid surface for a minimum of 24 hours, in compliance with all the National and Local Safety Regulations. The pre-tested palletized load configuration shall be duplicated using the same packaging materials, pattern, number of shipping (transport) containers, and procedures consistent throughout the duration of the contract. Palletized loads shall be stable and safe when handled with mechanical equipment by qualified personnel.
Materials: All lumber used inside or outside a shipment shall be bark free. No used wood pallets with repaired components or stringers will be acceptable. All wood pallet stringers shall be manufactured from hardwoods. Pallets manufactured of materials other than wood, shall conform to all the requirements specified herein.
Unitization: For the purpose of this requirement, the assembled group of containers or items in a single load that can be handled as a unit throughout the distribution system. Unitization encompasses, but is not limited to, consolidation in a container, placement on a pallet or load base having forklift capability, or securely binding together. Shipments should be considered for unitization where appropriate or specified.
Unitization of pallet load: The palletized load shall be unitized and secured to the pallet to insure that the load arrives intact without product damage. The containers or items shall be placed in a suitable pattern to form a stable and balanced load. Vertical, horizontal or filler reinforcement shall be added as necessary to meet the stacking strength requirements. A palletized load shall be secured to the pallet by shrink or stretch wrapping, and/or, by steel or nonmetallic strapping. When steel or nonmetallic strapping is used, edge protectors shall be provided to prevent damage to the cartons when tensioning the strapping. As a minimum, two straps shall run lengthwise, two straps shall run widthwise, and two straps shall run around the girth of the palletized load. A palletized load shall be capable of protecting the products against damage in a multiple handling, transportation, and storage environment having distribution warehouses with rack systems that support the load/s overhead of warehouse personnel.
Notice of special requirements for shipment to all countries, GSA Depots and DLA Consolidated Shipping Points that have endorsed the IPPC Guidelines for treatment of non-manufactured wood packaging:
http://www.aphis.usda.gov/import_export/plants/plant_exports/wpm/country/index.shtml
UNIT PACKAGES:
The unit packages shall be packed in a close fitting fiberboard box in compliance with the Uniform Freight Classification and the National Motor Freight Classification requirements of Rules, Item 222, Sec. 3., Minimum 200 psi, or
Brand Name or Equal Submissions:
FAR Provisions 52.211-6, Brand Name or Equal Applies
Link/URL: https://www.fbo.gov/notices/d1821e650bfe1d31766aef445f13165d
Copyright: | (c) 2013 Federal Information & News Dispatch, Inc. |
Wordcount: | 1316 |
Advisor News
Annuity News
Health/Employee Benefits News
Life Insurance News